⎝⎛必赢真人娱乐⎞⎠

Hello, welcome to the website of Shandong Jinshuanglian Environmental Protection Equipment Co., Ltd.!
13465650196 National Consulting Hotline 13465650196
Shandong Jinshuanglian Environmental Protection Equipment Co., Ltd.

⎝⎛必赢真人娱乐⎞⎠

NEWS CENTER
Use of sludge dewatering machine

Use of sludge dewatering machine

Solid-liquid separator

Solid-liquid separator

Kitchen oil water separator

Kitchen oil water separator

Shallow air flotation machine

Shallow air flotation machine

Comprehensive analysis of slag discharge separator
浏览次数: Release time: 2019-09-05 17: 56Views :

The slag separator is a special equipment for tailing treatment in the waste paper pulping process in various countries in recent years. Use effect is good. This machine has the characteristics of high fiber yield and low processing cost. It is mainly used for the separation of roughing tailings after fiber separators, duplex fiber separators and pressure screens. The tailings discharged after sorting do not contain fibers. , In line with environmental protection emission standards. 国外 公司引进,经 过山东金双联环保设备有限公司所有技术人员的 努力 ,现已 成为我 公司自行开发制造,是国产化的废纸制浆流程处理尾浆的理想设备。 This product was introduced by a foreign company. Thanks to the efforts of all technicians of Shandong Jinshuanglian Environmental Protection Equipment Co., Ltd. , it has become our company's own development and manufacturing, and is an ideal equipment for domestic waste paper pulping process to treat tailings.

1-3%左右,排渣浓度可达20%,处理效率高,纤维保留率高,回收率可以达80%以上;仅需常压操作,且为密闭式操作,避免污物飞溅,排渣处理 The slag discharge separator is mainly used for the treatment of tailings in the screening section of the waste paper system. The feed concentration is about 1-3%, the slag discharge concentration can reach 20%, the treatment efficiency is high, the fiber retention rate is high, and the recovery rate can reach 80. % Or more; it only needs normal pressure operation, and it is closed operation to avoid dirt splashing and slag disposal .

Structure introduction

1. The cylinder is welded by steel plate. The part in contact with the slurry is stainless steel. There are eight water spray pipes on both sides of the cylinder.

2. The rotor is a rotating rod with blades fixed on it.

3. The sieve plate is a combination of two semi-circular sieve cylinders, which can be selected and used as required.

Process characteristics of slag discharge separation equipment: used in fiber separator, duplex fiber separator, pressure sieve to get slag separation and slag removal.

online service
contact number
National Free Consultation Hotline 13465650196
  • · Professional consulting
  • · solution
  • · Tailored
  • · After sales service
back to the top
七乐彩 星力捕鱼 欢乐拼三张 天天电玩城